seam isulator is available in two forms, single-component and two-components. These seam isulation are suitable for isulating kitchen floors, bathrooms and any surface such as ceilings, terraces made of mosaic or tiles, ceramics and stone.
Resistant to acidic and alkaline detergents
One hundred percent sealing of the desired seam and surface and more adhesion of tiles, stone or ceramics
Penetration to the depths of the structure
High durability
Antibacterial (antimicrobial) and anti-algae and anti-moss surface
Prevent the accumulation of dirt under the surface of tiles, stones or ceramics as a result of bad odor
One hundred percent sealing without damage at the lowest cost
In sealing joints of single-component, old or new isulation joints or repairing damaged isulation , add 200 ml of water to this product and mix well to obtain a uniform paste, then close.
The final drying time is 24 hours after use, do not pour water on the relevant surface until the final drying time.
In the case of two-component , new or damaged joints, add the second component to the first component and mix well to obtain a uniform dough, then make the seam.
The final drying time is 24 hours after use, do not pour water on the relevant surface until the final drying time.
If the seam is intact, this solution is only used for antacids, chemical resistance and sealing. In this way, after cleaning and drying the joints completely, put the liquid on the seam in two stages. (Washable after 12 hours.)
This product should be stored indoors and away from direct radiation at a temperature of 5 to 35 degrees Celsius.
This product, as mentioned, is offered to the market in two forms: single-component (weighing 400 grams) and two-component (weighing 700 grams).
Multilingual WordPress with WPML
